iPad Logic Board Repair
We specialize in board-level iPad repair — fixing dead devices, boot loops, charge failures, liquid damage, and data recovery at the component level. Mail-in microsoldering service nationwide with free return shipping.
Mail-in iPad repair — nationwide
Free return shipping · 90-day warranty
No Power / Dead iPad
An iPad that won't turn on or respond to charging usually has a board-level fault — a failed PMIC, shorted capacitor, or damaged power rail. We test each rail under a microscope and replace the failed components rather than writing off the device.
Common symptoms
- • Completely unresponsive
- • No charging indicator
- • Gets warm but won't boot
- • Dead after battery drain
iPad Boot Loop Repair
An iPad stuck on the Apple logo during startup often has a failing storage chip, corrupted NAND, or a broken communication line on the logic board. We diagnose the hardware fault and repair the board so the device can boot normally again.
Common symptoms
- • Stuck on Apple logo
- • Restarts during boot
- • Progress bar freezes
- • Finder/iTunes restore fails repeatedly
Water & Liquid Damage
Liquid damage spreads corrosion across the iPad logic board, especially around connectors and under shields. We remove shields, clean corrosion under a microscope, and replace shorted or damaged components individually.
Common symptoms
- • Stopped working after spill
- • Intermittent touch or display
- • Corrosion around connectors
- • Worked briefly then failed
Charge & Battery Issues
iPads that won't charge, show incorrect battery percentage, or only charge intermittently often have charge IC or Tristar/Hydra-related failures on the logic board — not just a bad port or battery.
Common symptoms
- • Won't charge at all
- • Charges only at an angle
- • Accessory not supported
- • Rapid battery drain after repair attempt
Display & Touch Failures
When the screen stays black, touch stops working, or Face ID fails after a drop, the fault is often on the logic board — backlight filters, touch circuits, or connector damage — not the display assembly itself.
Common symptoms
- • Black screen with backlight off
- • Touch unresponsive in areas
- • Display lines after drop
- • Face ID unavailable
iPad Data Recovery
If your iPad won't boot and you need photos, notes, or files that weren't backed up, we can often recover data by repairing enough board function to access the storage chip or boot the device temporarily.
Common symptoms
- • Dead iPad with irreplaceable photos
- • Failed after water damage
- • No recent iCloud backup
- • Device won't enter recovery mode
Frequently Asked Questions
Can you repair a water-damaged iPad logic board?
Yes — in many cases. We clean corrosion under a microscope and replace damaged components on the logic board. Many iPads declared unrepairable by Apple or other shops can be fixed at the board level.
Which iPad models do you repair?
We service most iPad, iPad Air, iPad Pro, and iPad mini models. If you're unsure whether your model qualifies, submit a quote with the model number and we'll confirm.
Do I need to send the whole iPad?
You can send just the frame and logic board for many iPad repairs, but include the full device if it has Touch ID or Face ID so we can test those functions. Screen disassembly and reassembly is an additional $65 if needed.
How much does iPad logic board repair cost?
Cost depends on the specific fault. Most board-level iPad repairs range from $150 to $400. We provide a free diagnosis estimate before any work begins.
How do I mail my iPad in for repair?
Fill out our quote request form with your iPad model and issue. We'll respond within one business day with a diagnosis estimate and shipping instructions. We cover return shipping and include a 90-day warranty.